SVCRACK.PY(1)

NAME
svcrack.py - manual page for svcrack.py v0.2.8

SYNOPSIS
svcrack.py -u username [options] target

DESCRIPTION
examples: svcrack.py -u100 -d dictionary.txt 10.0.0.1 svcrack.py -u100 -r1-9999 -z4 10.0.0.1

OPTIONS

--version
    show program's version number and exit

-h, --help
    show this help message and exit

-v, --verbose
    Increase verbosity

-q, --quiet
    Quiet mode

-p PORT, --port=PORT
    Destination port or port ranges of the SIP device - eg -p5060,5061,8000-8100

-P PORT, --localport=PORT
    Source port for our packets

-x IP, --externalip=IP
    IP Address to use as the external ip. Specify this if you have multiple interfaces or if you are behind NAT

-b BINDINGIP, --bindingip=BINDINGIP
    By default we bind to all interfaces. This option overrides that and binds to the specified ip address

-t SELECTTIME, --timeout=SELECTTIME
    This option allows you to trottle the speed at which packets are sent. Change this if you're losing packets. For example try 0.5.

-R, --reportback
    Send the author an exception traceback. Currently sends the command line parameters and the traceback

-A, --autogetip
    Automatically get the current IP address. This is useful when you are not getting any responses back due to SIPVicious not resolving your local IP.

-s NAME, --save=NAME
    save the session. Has the benefit of allowing you to resume a previous scan and allows you to export scans

--resume=NAME
    resume a previous scan

-c, --enablecompact
    enable compact mode. Makes packets smaller but possibly less compatible

-u USERNAME, --username=USERNAME
    username to try crack

-d DICTIONARY, --dictionary=DICTIONARY
    specify a dictionary file with passwords

-r RANGE, --range=RANGE
    specify a range of numbers. example: 100-200,300-310,400

-e EXTENSION, --extension=EXTENSION
    Extension to crack. Only specify this when the extension is different from the username.

-z PADDING, --zeropadding=PADDING
    the number of zeros used to padd the password. the options "-r 1-9999 -z 4" would give 0001 0002 0003 ... 9999

-n, --reusenonce
    Reuse nonce. Some SIP devices don't mind you reusing the nonce (making them vulnerable to replay attacks). Speeds up the cracking.

-T TEMPLATE, --template=TEMPLATE
    A format string which allows us to specify a template for the extensions example svwar.py -e 1-999 --template="123%#04i999" would scan between 1230001999 to 1230999999"

--maximumtime=MAXIMUMTIME
    Maximum time in seconds to keep sending requests without receiving a response back

-D, --enabledefaults
    Scan for default / typical passwords such as 1000,2000,3000 ... 1100, etc. This option is off by default. Use --enabledefaults to enable this functionality

--domain=DOMAIN
    force a specific domain name for the SIP message, eg. -d example.org

    SIPvicious password cracker is an online password guessing tool for SIP devices Copyright (C) 2012 Sandro Gauci <sandro@enablesecurity.com>

    This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

    This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

    You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

SEE ALSO
The full documentation for svcrack.py is maintained as a Texinfo manual. If the info and svcrack.py programs are properly installed at your site, the command

    info svcrack.py

should give you access to the complete manual.